Warehouse Operations
Jump to navigation
Jump to search
Generating Labels
We use a Zebra GK420t Thermal Transfer Printer. Our main label is a 2" Wide x 1" High Label.
We use the Zebra Designer 3 Software to print the labels. It can print sequentially numbered labels.
- Open the Design Tag 1x2 H
- Select the Barcode
- Under "Advanced Properties...", make sure Limit Length is set to 6 (for 4 digit labels) or 8 (for 6 digit labels)
- Set the Initial Value to be the "next label #" from the Sequential Asset Label Record
- Set the number of Labels to print (should be a good number)
- Select Print
- Make sure "DARKNESS" is set to 25